Central Valley Surfacewater Map
Every line and circle is tied to a published, measured record. Where no public record exists, the feature is drawn dashed grey, and nothing is filled in. The exceptions are numbers modelled by this project or by PPIC: the estimated losses block in the System accounting panel (and the same estimates in the Pick a stretch of waterway panel), the “Estimate” rows for the Sacramento Slough and Colusa Basin Drain inflows under the Wilkins Slough to Verona balance and under a picked stretch that includes them, the flows the stretch budget works out between two gauges, and PPIC's modelled split of Delta outflow for WY2001–2021. All are kept in separate files, headed “Estimate” or “PPIC estimate”, and never mixed into the measured flows or balances (see “Estimated losses” below). The slough has no record after February 2013, and the drain none after September 2012 (a stand-in to September 2020, and none in a month with too few days), so their rows give a range from their own measured years. That range is never added to the balance. A few published figures are calculated, not measured: DWR's in-Delta use and net Delta outflow, and DWR's 2023 modelled aqueduct capacity. They are labelled estimated or modelled where they appear.
The Central Valley Groundwater Map and Forecast, the Central Valley Surfacewater Map and the Water Quality & Flows map make up the Central Valley Water MapCentral Valley Water Map.
The one forecast is the Allocation outlook: a modelled range for a contract's final allocation, fitted on the published announcements. It opens in its own window, is labelled “Forecast: modelled, not measured” wherever it appears, and is never added to a measured flow or balance.
Delivered project water (Surface water by subbasin / GSA section) shows the project water delivered to the contractors whose districts lie wholly inside each subbasin or GSA. It has four views: a map view that colours every subbasin or GSA for the year of the time bar (off by default; every other river, canal and reservoir is hidden while it is on), a chart over the years, a ranked table, and acre-feet per acre of the whole boundary area. Only the published figures of those contractors colour, rank and chart; contractors that straddle a boundary are shown beside them, marked ~, as an area-share estimate. CVP is per water year and SWP per calendar year, and the two are never added. A year with an unknown figure is n/a, never zero. Local surface water is not included.
On the Water Quality & Flows map, the Tributaries Map shows the published records of water temperature at 19 stations, and of dissolved oxygen at 3 of them. The records are from CDEC, USGS, DWR’s Water Data Library and DWR’s Environmental Monitoring Program. Where the publisher prints a daily value, the map uses it. Elsewhere the map computes the day’s mean, highest and lowest value from the publisher’s hourly or 15-minute readings, and says so. A computed mean is drawn when 18 of the day’s 24 hours have a reading and is judged when 22 do. A day’s highest or lowest value needs 22 hours with no gap longer than one hour. Before a day is computed, the map drops a reading outside 32 to 95 °F or 0 to 25 mg/L, a reading of exactly 32.0 °F, 0.0 °C or 0.0 mg/L (a placeholder, not a measurement), a reading CDEC flags as an error or out of range, and a temperature jump of more than 5 °F lasting 3 hours or less. For oxygen it also drops a jump of more than 3.0 mg/L lasting 3 hours or less, and readings under 2.0 mg/L from a failing sensor: one value repeated for 6 hours or more, or a run that ends in a rise of more than 5.0 mg/L within an hour. CDEC’s values are real-time and not reviewed, so each one is marked provisional.
Each day is compared with the written standard at the station, where the standard gives a number, a place and dates. The standards are Order WR 90-5, for the Sacramento River at the place the year’s Sacramento River Temperature Management Plan names and for the Trinity River; the plans’ own targets; the temperature requirements for Clear Creek at Igo and the American River at Watt Avenue that the Tributaries Map lists for those rivers; the National Marine Fisheries Service’s 2009 Action III.1.2 at Orange Blossom Bridge and Knights Ferry on the Stanislaus River, written on the seven-day average of the daily maximum; 7.0 mg/L of dissolved oxygen at Ripon; the North Coast Basin Plan’s Table 3-1b for the Trinity River; and the dissolved oxygen objectives of the Bay-Delta Plan (Table 3) and the Central Valley Basin Plan for the San Joaquin River at Stockton. Each station’s block quotes the rule and gives its page. The other stations show the record with no standard judged. The map also draws 2 places that have a standard and no public record, as “not publicly measured”. The map does not decide whether a day beyond a limit was excused or reported to the agency.
Temperature is shown in °F with °C beside it. A record published in °C is converted (F = C × 9/5 + 32). A day over a limit by no more than the record can resolve is shown as “at the limit” and counted apart from the days met and the days above: 0.2 °F for a record published in °C, and 0.1 °F for a daily mean or seven-day average this map computes from readings in °F. A year whose plan this project has not collected is shown as “plan not collected”. No value is filled in or modelled, and nothing of the layer enters a flow, a balance or a river’s colour.
Terms are defined in the Glossary (header), each with the document that defines it.
Copies of cited documents are kept for citation; owners may ask for removal: williamadamsgray@gmail.com
The System accounting panel splits each reach's measured “unmeasured loss” into what evaporation, seepage, and rain on the water could explain. These are estimates made by this project, not measurements and not figures published by DWR. They are shown as ranges with a confidence grade, beside the measured balance, and never change it. Ranges cover the stated assumptions only; the true value can lie outside them. Not for operational, legal, or financial use.
This site counts page views and which features are opened, using GoatCounter. It sets no cookies, stores no IP addresses, and collects no personal data; what you type in a search box is never sent. The counts are totals only. GoatCounter's privacy policy.
The site also keeps its own daily totals of the same page views and feature names, on a small Google Cloud service run for this map. It keeps a count per day and per name, nothing else: no cookies, no IP addresses, no browser details (only whether a page view came from a known crawler) and nothing you type. Frozen release copies and pages shown inside another site are not counted. To leave a browser out of these counts and GoatCounter's, open usage/off once in it (a flag in the browser's storage holding only the word "off"; usage/on undoes it).
On surfacewater.cvwatermap.com and wq-flows.cvwatermap.com, each request passes through Cloudflare before it reaches the Google Cloud Storage bucket that holds the site; both see the visitor's IP address in order to deliver the page (Cloudflare's privacy policy).
The map shows historical surface water in the Central Valley: the State Water Project, the Central Valley Project, the Friant Division, rivers, reservoirs, and the Delta. The numbers come from published measurements, day by day since water year 2001.
The map shows measured data only. Estimates are labelled as estimates and never added into measured totals. Where nothing is published, the map says “not publicly measured”.
Loading…
The notes list every error found in a published source, and every bug found in this project's own processing, that changed (or could have changed) a number on this map. Each note says what it looked like, how it was settled against independent numbers, and what the map does now. Gaps in what the agencies publish that bias a balance are listed too.
Corrected means the map uses a value confirmed by another published table or gauge. Left out means the bad values are dropped and show as no record. Flagged means the values are kept, with the doubt noted where it shows. Open means the note is not settled yet; nothing has been filled in with a guess.
The glossary defines the terms this map uses, in plain language, each paraphrased from the document that defines it. Where the map uses a term more narrowly than the document does, that is said under “On this map”. Underlined terms in the panels open their entry.